BNCR adapter
for LOMO round Front
Anamorphic lenses - 35 BAS 35,50,75,100 and 150mm.
|
FOR
YOUR INFORMATION:
You
have purchased excellent lenses LOMO
or Ekran factory with OST 19 OST 18
or TEMP skl adapter. But sometimes Konvas
Kinor or TEMP skl camera has broken,
and you have decided to make film on
other camera, with PL or BNCR adapter.
Excellent possibility to use LOMO or
Ekran factory lenses on such camera,
it is necessary to convert these lenses
on PL or BNCR adapter. With
this PL adapter, lenses LOMO and EKRAN
factory can be used for Kinor, Konvas
2m&8m, Arriflex and others
cameras ( with PL mount
).
Specialist from studio
of films makes PL and BNCR adapters:
1.
PL adapter (s) for:
LOMO
round Front Anamorphic lenses - 35 BAS
35,50,75,100 and 150mm.
2. BNCR
adapter (s) for: LOMO
round Front Anamorphic lenses - 35 BAS
35,50,75,100 and 150mm.
For
such objectives the specialist can make
PL adapters without any problems. You
can install the adapter on lenses independently.
5 . PL
adapter (s) for
LOMO OKC5-18-1, OKC3-22-1, OKC7-28-1,
OKC11-35-1, OKC1-50-1, OKC6-75-1, OKC2-100-2,
OKC1-150-1 (35mm).
!NEW
technology!!!
Now All 35mm lenses OKC can be converted
in PL or BNCR
adapter. But they
are very miscellaneous.
Look please fotos. Some of lenses need
to be sent in Russia, Saint Petersburg,
for installation PL
or BNCR adapters
but some of them it is not necessary.
If you see on the lens LOMO or EKRAN,
that OCT 19 or OCT 18 adapter is fastened
by 4 screws, such objective
does not need to be dispatched in Russia.
It is possible to receive the adapter,
and to install it on a lens independently.
BUT for LOMO and EKRAN lenses OKC
200 and 300 mm, it is necessary
to turn away (if it is probably) 4 propellers,
and to send only OCT 19 or OCT 18 adapter
in Russia, for installation PL
or BNCR adapter.
6.
PL
adapter (s) for
LOMO ZOOM16
OPF12-1 (10-100mm),
OKC5-18-1, OKC3-22-1, OKC7-28-1,
OKC11-35-1, OKC1-50-1, OKC6-75-1, OKC2-100-2,
OKC1-150-1
(16mm),
for Kinor 16 CX-2m
and 3M. For
all lenses OKC 16 mm, it is possible
to receive the adapter, and to install
it on a lens independently.
7 . PL
adapter for
LOMO ZOOM lens - 35OPF18 F=
20 - 120mm , for
Anamorphic, 1.5 and 2.1 tele-extender
8 . PL
adapter for
LOMO ZOOM lens - 35OPF25 F=
25 - 250mm , for
Anamorphic tele-extender.
9.
PL adapter for
LOMO ZOOM lens - 35OPF1-1 Is
made in USSR \ Russia, at the factory
EKRAN.
F
= 50 - 150 mm,
and Anamorphic tele-extender.
10.
PL adapter for
LOMO ZOOM lens - 35OPF7-1 Is
made in USSR \ Russia, at the factory
EKRAN.
F
= 25 - 500 mm, and Anamorphic
tele-extender.
11 . PL
mount for KONVAS 2
and 8M
12.
PL and BNCR adapter (s) for
LOMO ZOOM lens - FOTON
with OST18 mount.
If
the adapter or mount for lenses OR camera
is necessary,
ask.
The
time of fabrication and installation
+ adjustment (check) on a optical bench
with lenses will be a maxima one month.
Usually 3 -10 working days. The period
depends on an amount and complication.
If you want to receive adapter(s) immediately,
I ask to write
about
it. Sometimes is available.
Ordinary
term.
1. In the beginning send me a photograph
of the back of the lenses. I want to
be convinced, that it will be made.
The photo is not necessary, if you are
sure, that is necessary adapter
only. I will look
photographs, will tell time, cost of
fabrication and installation of adapters.
When I shall receive parcel with the
lenses, and the specialist will see
lenses I'll write about it and shall
send the photo of the lenses to the
customer.
Then it will be necessary to send money.
The specialist will not make adapters
without advance. All adapters are made
under
the order.
When lenses will be ready, I shall do
the photos and I shall send them and
parcel to you and advice about it.
2. I
can not accept payment through Paypal,
because i can accept payment only then,
when I sell items on eBay. I can accept
payment via bank
transfer or Western
Union.
3. The delivery from St. Petersburg
in USA by "Registered International
Airmail" will be 10-15 days, but
sometimes customers receive parcel through
8 or 18 days. In to Europe 8-12 days.
Material of the ALL PL and BNCR
adapter (s)
- stainless steel.
Look also our items on eBay |
|
|
|
|
